Aluminium Smart Ceiling · Supplied by Alu-R Pro

Aluminium Smart Ceiling

Ceiling and soffit panels for the places where moisture ruins plaster and timber. Balconies, porches, car porches, covered walkways and the underside of every roof we supply.

Fan set into the panel, aluminium smart ceiling supplied by Alu-R Pro in Singapore

Specify it when…

Look elsewhere when…

What it looks like finished

Judged entirely from underneath.

Nobody sees the top of a ceiling panel. What matters is that the plane is continuous, the joints line through, and the fittings sit in the surface rather than on it.

Fan set into the panel, aluminium smart ceiling supplied by Alu-R Pro in Singapore
Fittings set inFan mounts and downlights are set out before the panels go up, so they sit flush.
Panel going up, aluminium smart ceiling supplied by Alu-R Pro in Singapore
Panel by panelPanels clip to a concealed carrier, so there are no exposed fixings in the finished plane.
Dining under the panel, aluminium smart ceiling supplied by Alu-R Pro in Singapore
Timber look, no timber upkeepThe finish reads as timber from standing height and needs none of the sanding or sealing.

Specification

Every figure verified before it is published.

Dimensions, alloys, finishes and performance data are published only once the documentation is in hand. Fields marked pending are confirmed on the profile sheet and stated in your written quotation. We do not publish unverified figures.

Further reading: Why the deck, the screen and the soffit should come from one system.

System typeAluminium ceiling and soffit panel
FixingConcealed carrier, no exposed fixings in the finished plane
FinishPowder coated, timber look and solid colours
ApplicationsBalconies, porches, car porches, covered walkways, roof soffits
IntegrationFan mounts and downlights set out before panels go up
Panel widthsAwaiting owner confirmation
Fire performanceAwaiting owner confirmation
WarrantyAwaiting owner confirmation

Ceilings we supply.

Balconies, porches and covered walkways, photographed on site after handover.

Fan set into the panel, aluminium smart ceiling supplied by Alu-R Pro in Singapore
Fan set into the panel
Ceiling corner, aluminium smart ceiling supplied by Alu-R Pro in Singapore
Ceiling corner
Room and window, aluminium smart ceiling supplied by Alu-R Pro in Singapore
Room and window
Dining under the panel, aluminium smart ceiling supplied by Alu-R Pro in Singapore
Dining under the panel
Panel going up, aluminium smart ceiling supplied by Alu-R Pro in Singapore
Panel going up
Underside and timber trim, aluminium smart roof supplied by Alu-R Pro in Singapore
Underside and timber trim
Timber look wall, aluminium systems supplied by Alu-R Pro in Singapore
Timber look wall
Slatted facade, aluminium systems supplied by Alu-R Pro in Singapore
Slatted facade

Questions we get asked

Questions on this system.

Short answers. Where a figure is not confirmed yet the page says so instead of estimating it.

Why not just use plasterboard or timber outdoors?
Both fail on a moisture exposed soffit. Plaster stains and blows, timber moves and needs refinishing. An aluminium panel does neither, which is the whole reason the system exists.
Can fans and lights go into it?
Yes, and they should be set out before the panels go up so they sit flush in the plane rather than being cut in afterwards. Tell us where they go at specification stage.
Does it look like metal?
From standing height a timber look finish reads as timber. Up close it reads as metal. That is an honest trade and worth seeing a sample before you decide.
Is it the same panel used under your roofs?
Yes. The soffit of an ALUR Smart Roof is this panel, which is why the frame, trim and ceiling all match on a finished job.

Get a quote

Send us the space and we will quote it.

A rough size and a photo is usually enough to come back with a price and a lead time.

Workshop8 Kaki Bukit Avenue 4 #07-29
Singapore 415875
SystemsDecking, fencing, smart roof, smart ceiling